CP6500-1006-0020 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff CP6500-1006-0020 is part of the CP Panel PC Systems series and features a 10 inch display with an IP65 front protection rating. This Panel PC has a weight of 10.1 kilograms and contains 7 mainboard slots. The chassis dimensions are 333 mm wide, 308 mm high, and 165 mm deep.
Internal Product Review
The CP6500-1006-0020 is a Beckhoff panel PC system with a 10 in display and a compact cabinet-ready design. Front IP65 protection and rear IP20 protection support dependable use at the machine interface and within enclosed control panels. With 7 mainboard slots and 2 serial ports, this unit offers strong integration flexibility for industrial control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP6500-1006-0020 is a panel PC produced by Beckhoff and offered in the CP Panel PC Systems series. This model merges touchscreen visualization, PC-based control hardware, and communication interfaces behind an aluminum front plate. In an automation line, it mounts on the machine door, runs TwinCAT or other soft-PLC tasks, and presents status data to the operator while eliminating cabinet-mounted industrial computers.
The front of the CP6500 carries a 10 in TFT display that sets the operator work area and corresponds to an external panel size of 370 mm by 336 mm. An ingress protection rating of IP65 is assigned to the front face, so dust and low-pressure water jets cannot reach the screen, whereas the rear section is limited to IP20 for standard control cabinet environments. Inside the housing, Beckhoff provides 7 free mainboard slots for PCI or PCIe cards, giving room for fieldbus adapters or additional storage. Two isolated serial interfaces are available, and the presence of 2 ports supports legacy RS-232 devices such as barcode readers. The unit has a chassis width of 333 mm and a height of 308 mm, allowing it to fit panel layouts without changing the surrounding machine door.
System builders allocate clearance by noting the enclosure depth of 165 mm, while the visible panel projects only 32 mm beyond the mounting surface, so the remaining depth can accommodate connectors and ventilation paths. A cabinet opening of 356 mm in width and 322 mm in height positions the front gasket flush with the machine door and helps maintain the front seal. The assembly weighs 10.1 kg, which supports stable mounting and adds inertia that helps stabilize plug-in cards inside the chassis. Continuous performance is specified up to 95% RH non-condensing, permitting installation in damp production areas when the rear side stays inside a dry enclosure.
