Product Description:

The CP6402-0001 is a Beckhoff panel-mounted computer in the CP Panel PC Systems series. It combines an operator display, PLC-level control, and networking functions in a single housing sealed at the front for cabinet-door installation. The design suits production lines, packaging cells, and small process skids that need an integrated PC close to the machine while withstanding routine washdown and airborne dust.

Its 15-inch TFT display provides adequate workspace for SCADA elements and HMI pages without exceeding typical eye-to-panel distances on compact machines. Video signals are delivered through the DVI-I port, so the built-in graphics controller can drive digital or analog monitors during service. The aluminum front panel carries an ingress rating of IP65, helping resist dust and low-pressure water jets when the computer is flush-mounted. For controls networking, the motherboard exposes a 10/100/1000BASE-T primary Ethernet interface for real-time fieldbus adapters, and legacy device integration is maintained by one RS-232 serial port. The bezel thickness is 32 mm, and the front measures 430.4 mm high by 403 mm wide, maximizing viewing area within a modest footprint.

Behind the bezel, the housing extends 79 mm into the cabinet, so only 416.4 mm of height and 389 mm of width are required inside the enclosure for a secure clamp fit. The rear section carries a protection level of IP20, which is appropriate for clean cabinet interiors already covered by the higher front rating. Three USB sockets comply with the USB 2.0 standard, enabling hot-swappable backup drives or touch calibrators, while a secondary 10/100BASE-T port separates machine networks from office traffic. Despite the integrated display and cooling, the assembly weighs just 6.0 kg, which helps reduce load on lightweight control doors during installation.