Product Description:

The CP6202-0000-0020 is a fanless Panel PC built by Beckhoff for the CP Panel PC Systems series. As an HMI and control node, it integrates display, computing, and field-network interfaces so a machine builder can run PLC logic, visualization, and data collection in a single enclosure. Mounted directly on a cabinet door or swing arm, it provides operators with on-site access to runtime parameters while shielding the electronics behind a sealed aluminum front panel that suits industrial automation environments.

The touchscreen measures 15 in, delivers a native resolution of 1024 x 768, and maintains a classic 4:3 aspect ratio, matching legacy SCADA layouts without scaling artifacts. Its front panel carries a rating of IP65, so water jets or dust do not reach the display or gasket, while the housing depth is only 59 mm, allowing shallow cabinet doors. Physical dimensions of 380 mm width and 315 mm height leave room for wiring bends behind the unit. The motherboard follows the 3.5-inch form factor, which secures CPU, RAM, and chipset on one compact board. Storage media are handled by one CompactFlash slot and one hard-disk carrier, giving the unit solid-state or rotating storage options. No front keys are present, so accidental presses are eliminated; instead, all input occurs on the touch surface.

Network connectivity is provided by 2 Ethernet ports for segregated automation and IT traffic, while a single RS-232 serial port handles legacy devices. A 24 V DC supply feeds the internal power converter and keeps wiring consistent with control-cabinet standards. Rear housing protection remains at IP20, which is appropriate for closed enclosures with conditioned air. External monitors or projectors can be attached through the DVI output, extending the visualization to a separate workstation. This interface layout keeps network, serial, and display connections available from the same enclosure without requiring a separate IPC.