Product Description:

The CP6002-0000-0010 is an operator panel manufactured by Beckhoff within the CP Panel PC Systems series. It integrates a 15 inch TFT display and CP-Link transmission technology, allowing the screen, touch sensor, and peripheral signals to travel over a single cable to a remote industrial PC. Deployed on machine fronts or automation cells, it provides the human-machine interface for visualization, command entry, and status feedback. Because the computing hardware is installed remotely, the panel can be mounted close to the process area while the host PC remains inside a protected cabinet.

The aluminum enclosure measures 430.4 x 403 x 32 mm, which supports flush installation in a control cabinet door and keeps the front assembly slim. A 15 in active area with TFT technology renders process graphics at 1024 x 768 pixels for clear menus, status pages, and operating screens. Protection is rated at IP65 front / IP20 rear, so the bezel can face dust and sprayed moisture while the rear remains intended for sheltered mounting locations. The panel withstands shocks up to 5 G, 30 ms during transport or machine vibration, and the CP-Link connection also carries operating power to the electronics without a separate local supply lead.

The required panel cutout is 416.4 x 389 mm, and only the 4 mm visible front projects beyond the sheet-metal surface for a nearly flush appearance. CP-Link runs can reach 100 m, which gives flexibility when the host PC is installed away from the operator station and supports cleaner cable routing between the machine interface and the control hardware. The unit can operate at up to 95% RH without condensation, and the lack of a physical keyboard leaves the front surface dedicated to display and touch functions. The aluminum housing is secured from the rear against the panel opening, which keeps the installation compact and maintains a clean outer face.