CP3919-1058-0011 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff CP3919-1058-0011 is part of the CP Panel PC Systems series and features a 19 inch display with a 5:4 aspect ratio and a native resolution of 1280 x 1024. It is designed for mounting arm installation, has a PCT multi-finger touchscreen, and an IP65 protection rating. The unit is built with a glass front and aluminum housing, supports a nominal input voltage of 24 VDC, and withstands shock resistance up to 5 G for 30 milliseconds.
Internal Product Review
The CP3919-1058-0011 is a Beckhoff panel PC system with a 19-inch display and 1280 x 1024 native resolution. PCT multi-finger touch operation and IP65 protection make the unit especially effective for demanding operator interface applications. Mounting-arm installation and 24 VDC input support clean integration in industrial control stations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP3919-1058-0011 is a Panel PC produced by Beckhoff within the CP Panel PC Systems series. Designed as an operator terminal for machine and plant automation, it combines an industrial touchscreen display with an integrated computer so that motion controllers, PLC logic, or SCADA software can run locally at the production line. Its mechanical format is suited for mounting-arm installation in front-end stations where real-time visualization, parameter entry, and diagnostics must be available close to the process. The unit maintains separation of low-voltage and signal wiring inside a sealed housing, which simplifies field integration.
The user interface is provided by a 19 in TFT panel matched to a 5:4 aspect ratio, yielding a native resolution of 1280 x 1024 pixels for process graphics. Projected-capacitive PCT multi-finger sensing enables gesture input through a scratch-resistant glass front. That glass is bonded to an aluminum housing whose surface is electrically insulating to help avoid ground loops when the unit is mounted on conductive arms. The device is specified for IP65 protection on the front and sides, which blocks dust and water jets. Internal electronics operate from a nominal supply of 24 VDC, and the mounting-arm layout keeps the display close to the process.
Power enters through a 4-pin M12 connector that is rated for a continuous line current of 16 A when the supply approaches the permitted 24 V level. Field wiring to that connector can use up to 4 x 0.75 mm² conductors, matching typical flexible machine-tool cabling. The panel withstands mechanical shocks of 5 G for 30 ms, so it can be used on mobile gantries or presses without data loss. Environmental limits include operation in up to 95% relative humidity without condensation, and the projected-capacitive interface remains responsive through gloves because it tracks multiple contact points.
