CP3912-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff CP3912-0000 is part of the CP Panel PC Systems series and features an IP65 protection rating and a nominal input voltage of 24 VDC. This panel PC supports a maximum cable cross-section of 4 x 0.75 mm² and a maximum panel distance of 50 meters. It weighs 3.4 kg and operates in temperatures from 0 to 55 degrees Celsius.
Internal Product Review
The CP3912-0000 is a Beckhoff panel PC system with a 24 VDC nominal input and a 4-pin M12 power connector. IP65 protection and CAT 5 USB-E cabling support dependable operation and clean integration in distributed machine layouts. A maximum panel distance of 50 m is a strong advantage for flexible installation planning.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP3912-0000 is an industrial panel PC produced by Beckhoff within the CP Panel PC Systems series. Designed as a front-end human-machine interface, it combines computing hardware with an integrated touch display for direct mounting on control cabinets and machines. In automated lines, it provides visualization, parameter entry, and data collection without needing a separate computer enclosure, simplifying layout while keeping the processing electronics inside the protected panel housing.
It draws a nominal input of 24 VDC through a rugged 4-pin M12 connector, and the supply circuitry tolerates 22–30 VDC so brownouts on long cable runs do not interrupt operation. The plug is rated for a continuous load of 16 A, and conductor sizes up to 4 × 0.75 mm² are accepted by the mating cable set, allowing parallel power and ground pairs to reduce voltage drop. An IP65 enclosure rating means the front side resists dust ingress and low-pressure water jets, supporting washdown mounting outside the cabinet. Thermal design maintains full performance from 0 to +55 °C, matching typical control room and machine-frame environments without additional cooling fans.
The maximum panel distance is 50 m when standard CAT 5 USB-E cabling is used, permitting separation of the display unit from the host IPC while keeping touch and peripheral signals intact over the remote connection. The housing withstands mechanical shocks up to 5 G, 30 ms and endures vibration levels of 10–58 Hz at 0.035 mm displacement and 58–500 Hz at 0.5 G, so the unit can be installed directly on presses, robotic bases, or mobile platforms. With a mass of only 3.4 kg, the panel imposes minimal load on support arms, and storage temperatures from –20 to +65 °C allow safe warehouse or transport conditions between deployments.
