Product Description:

The CP2219-0000 is a panel PC manufactured by Beckhoff within the CP Panel PC Systems series. Intended for machine-level installation, the platform supports visualization, data processing, and supervisory control tasks inside automated plants where compact computing must coexist with demanding ambient conditions. The design is meant for equipment such as packaging stations, material-handling lines, and energy systems that need a single enclosure to run control software close to sensors and actuators.

The housing achieves a frontal protection rating of IP65, so sprayed water or dust cannot enter the operator side, while the rear section remains at IP20 for cabinet interior airflow. Power is delivered by a dedicated 24 VDC rail, and onboard converters tolerate input excursions from 20.4 VDC up to 30 VDC, helping the system ride through brief drops on long supply runs. Electronics operate between 0 °C and 55 °C, and the computer can be stored from -25 °C to 65 °C without damage. A maximum relative humidity of 95% is acceptable provided condensation is avoided. During handling or transport, the assembly withstands mechanical shocks of 5 G applied for 30 ms, preventing deformation of connectors and circuit boards.

Industrial panels are routinely exposed to low-level vibration from pumps, gearboxes, and conveyors, and the unit is qualified for 0.5 G sinusoidal acceleration at a peak displacement of 0.035 mm, which aligns with IEC 60068-2-6 test profiles. The metal enclosure weighs 7.8 kg, providing mass that helps damp resonant peaks when the panel is mounted on swing arms or extension brackets. A discrete fTPM 2.0 secure element is soldered to the motherboard, enabling hardware-rooted key storage for encrypted boot and network authentication. This secure element supports protected credential storage in systems that require controlled access to machine data.