C6240-1044-0030 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff C6240-1044-0030 is a control cabinet industrial PC from the C6 Industrial PC Units series. It features a 7-slot ATX computer core, a CBxx51 motherboard, and measures 430 by 170 by 274 mm. The unit offers IP20 protection, 4 USB ports, 2 RS232 serial ports, and weighs 12.3 kg.
Internal Product Review
The C6240-1044-0030 is a control cabinet industrial PC built on a 7-slot ATX computer core. IP20 protection and four USB ports make the unit especially practical for dependable cabinet integration and peripheral connectivity. One RJ45 LAN port and two RS232 serial ports give this Beckhoff platform strong communication flexibility for industrial control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The C6240-1044-0030 is a control cabinet industrial PC produced by Beckhoff and included in the C6 Industrial PC Units series. As a centralized computing node, it hosts motion, logic, and visualization tasks inside automated machinery, allowing one platform to manage control and operator-facing functions at the same time. It replaces stand-alone controllers with a single cabinet-mounted system that interfaces with fieldbuses and supervisory networks for coordinated data exchange across the machine.
Its computing core follows a 7-Slot ATX architecture, providing multiple expansion positions for dedicated interface cards. This arrangement allows the unit to accept add-on hardware for communication, control, or other machine-specific functions. The system board designated CBxx51 supports this chassis and sets the chipset and memory layout. With external measurements of 430 x 170 x 274 mm, the housing fits standard 19-inch control enclosures while still allowing airflow around the internal fans. Network connectivity is delivered through a single 1 x RJ45 LAN interface that brings the PC onto plant Ethernet segments. The enclosure carries an IP20 protection class, so it is intended for dust-shielded cabinets rather than open-machine mounting. Shock survival is rated at 5 G for 30 ms, and the chassis tolerates sinusoidal vibration of 0.035 mm at 10–58 Hz and 0.5 G between 58–500 Hz. A rear-panel LPT1 parallel connector remains available for legacy printers or I/O modules.
At 12.3 kg, the unit can be installed on DIN rails or tray slides without reinforcing the cabinet structure. Four front-mounted USB ports, shown as 4, accommodate memory sticks or human-machine interface devices during setup. Two isolated serial channels listed as 2 x RS232 let the PC communicate with barcode readers, weigh scales, or older drives that still rely on asynchronous protocols. A 1 x VGA connector supplies analog video to maintenance monitors so that diagnostic information remains accessible even when high-resolution digital displays are not supported.
