C6240-1007 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff C6240-1007 is part of the C6 Industrial PC Units series and has a width of 430 mm, height of 170 mm, and depth of 274 mm. This unit is protected to IP20 and features 5 contacts with a contact spacing of 5 mm. It supports up to 7 slots, a rated voltage of 300 V (csa), a current rating of 15 A (csa), and a minimum wire gauge of AWG 16.
Internal Product Review
The C6240-1007 is a Beckhoff C6 industrial PC unit with 7 slots and IP20 protection. A 15 A CSA current rating and 300 V CSA rated voltage support dependable power handling in machine control cabinets. This configuration makes the unit a strong choice for organized, service-friendly industrial computing installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The C6240-1007 is a cabinet-mount controller manufactured by Beckhoff and positioned within the C6 Industrial PC Units series. It supplies PC-based processing power for machine-level automation, allowing PLC logic, motion control, and HMI tasks to run inside a control enclosure without an external computer. By combining industrial-grade computing hardware with fieldbus and I/O interfaces, the unit serves as the central node that coordinates sensors, drives, and actuators across production equipment. Its cabinet-mounted format also keeps the computing platform close to the machine while leaving control functions centralized inside the enclosure.
Mechanical integration is simplified by a width of 430 mm, a height of 170 mm, and a depth of 274 mm, dimensions that fit standard cabinet layouts. The enclosure meets an IP20 protection class, so it must be installed in a closed panel but needs no additional gasketing once inside. Seven PCIe or PCI slots are available; this 7-slot backplane accepts motion cards, networking adapters, and specialty interfaces. Five pluggable power contacts with 5 mm spacing route mains and control voltages while keeping creepage distances consistent with the rated insulation. Supply conductors may be as small as 1.5 mm², and the wiring can be pulled with AWG 16 copper to minimize panel bulk. The expansion layout also supports application-specific interface cards when standard connections are not enough for the machine.
Electrical ratings match typical switchgear circuits: the Canadian listing allows operation up to 300 V, while the European notation limits line voltage to 250 V. Continuous load on the main bus is handled at 15 A cUL or 12 A EN, and an internal line fuse of 16 A protects downstream components against short-circuit events. The auxiliary 24 V rail that reports the power status draws only 0.5 A, so logic monitoring adds negligible demand during normal operation. A front-to-back airflow path is reserved; installers must keep a clearance of 50 mm above and below the chassis so that the integrated fans can discharge heat without derating. This airflow requirement helps the controller maintain stable internal temperatures in densely packed cabinets.
