Product Description:

The C6032-1006-0070 is an industrial PC module manufactured by Beckhoff within the C6 Industrial PC Units series. Intended for space-restricted control cabinets, the unit serves as the central processor for motion control, PLC logic, data acquisition, and visualization in automated plants. Its fanless aluminum enclosure, DIN-rail mounting orientation, and compact form allow direct installation next to drives and field I/O. This arrangement helps reduce panel depth and keeps control hardware concentrated in a small cabinet area without relying on a separate computer chassis.

The controller runs from a nominal bus of 24 VDC and has a touch-safe IP20 housing for cabinet installation. External dimensions measure 132 mm in width, 133 mm in height, and 102 mm in depth, which supports high-density placement in narrow enclosures. Graphic output is provided by two DisplayPort connectors, and each port can drive a 4K monitor for local HMI screens or diagnostic displays. Four USB 3.0 interfaces accept high-speed cameras, service media, or touch panels, and each port can supply up to 900 mA. On-board networking is handled by four RJ45 Gigabit Ethernet ports, with cable lengths up to 100 m when standard Cat 6 media is used. Two PCIe Compact slots also allow fieldbus or motion expansion cards to be added without increasing the enclosure size.

System memory is upgradeable through two DRAM SODIMM slots, which provides room for larger PLC projects, data buffers, or vision libraries. All operating data is stored on an M.2 SSD, so the unit avoids rotating media and can start quickly after power is applied. Platform security is supported by an embedded fTPM 2.0 secure element that manages keys and supports measured boot. Power enters through a pluggable terminal rated at 8 A, and the terminal clamps accept conductors up to 1.5 mm² for stable connection to the supply line. This layout keeps storage, memory, networking, and power connections accessible from the cabinet side.