Product Description:

The AX8206-0100 is a dual-channel servo drive produced by Beckhoff within the AX Digital Servo Drives series. It provides closed-loop motor control for machinery that requires coordinated motion, velocity regulation, and torque management. By integrating with EtherCAT-based controllers, the unit supplies regulated DC-bus energy to rotary or linear servomotors, allowing compact axis control inside automation cabinets. Because both channels are integrated in one housing, the drive can reduce cabinet space and simplify axis distribution in machines with paired motion tasks.

Each axis can deliver a nominal output current of 6 A per channel, while the minimum rated current of 1 A supports low-power positioning tasks. The internal DC link stores energy in 135 µF of capacitance and tolerates up to 848 VDC. Under continuous operation, the basic power loss is limited to 12 W, which helps manage cabinet temperatures during sustained use. Motor command resolution is supported by a maximum output frequency of 599 Hz, and the brake control stage supports holding-brake switching. This combination of current capability, DC-bus tolerance, and low dissipation suits compact servo axes that need stable output without excessive heat buildup.

Integrated safety follows the TwinSAFE architecture by using two safety inputs per axis with a 4 ms filter, and the drive supports the certified stop functions STO and SS1 for controlled risk reduction. The housing is 60 mm wide and 192 mm deep, which supports dense mounting on DIN rails in multi-axis cabinets. An auxiliary 24 V supply powers the logic and brake circuits, allowing control functions to remain separate from the main DC bus. Physical wiring remains straightforward because each axis includes two standard digital inputs and accepts signal wire cross-sections up to 1 mm², which reduces the need for extra interface modules when connecting limit switches or homing sensors.