Product Description:

The AX5190-0000-0200 is a single-axis power stage produced by Beckhoff within the AX Digital Servo Drives series. Designed for cabinet installation, this drive interfaces with synchronous or induction motors to regulate torque, velocity, and position in automated machinery lines. By converting three-phase mains power into a controlled DC link and pulse-width-modulated output, it acts as the motion backbone for pick-and-place units, packaging stations, and material-handling equipment.

Internally, the drive supports 1 channel, so one motor can be addressed per amplifier slot. A DC link capacitance of 1060 µF buffers regenerative energy and attenuates supply ripple, while the bus link is supervised by protective circuitry rated for a maximum of 1300 W continuous power loss during S1 duty. Nominal apparent power reaches 62 kVA on a 400 V mains supply, providing a rated output current of 90 A for continuous motion and up to a peak output current of 180 A for dynamic acceleration. Command data and diagnostics are exchanged over the EtherCAT system bus, giving controller cycle times under a millisecond. Mechanical integration is simplified by a width of 280 mm, a height of 540 mm, and a depth of 253 mm without connectors. Compliance with the IEC 61800-7-204 drive profile supports consistent parameter mapping across control environments.

The energy section is sized for a maximum DC link voltage of 875 VDC, allowing regeneration from high-speed axes without overvoltage tripping. Up to 67 kW of external braking power can be dissipated when a brake chopper is paired with at least a 10 Ω resistor, so rapid deceleration of heavy loads can be handled without excessive stress on the DC bus. Internal fault logging and temperature monitoring protect the semiconductor bridge during demanding duty cycles.