AS1060-1110 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff AS1060-1110 is part of the AS Stepper Motors series and has a holding torque of 5.0 Nm with a rated current of 5.0 A. This stepper motor has a step angle of 1.8 degrees and a feedback resolution of 200 increments. It weighs 2.85 kg and offers a rated power of 68.8 W.
Internal Product Review
The AS1060-1110 is a Beckhoff stepper motor that stands out for precise indexing with a 1.8° step angle and solid 5.0 Nm holding torque. A rated current of 5.0 A paired with 68.8 W rated power supports stable motion performance in demanding positioning duties. Bearing life rated at 30,000 h makes the unit a strong long-service choice.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AS1060-1110 is a two-phase stepper motor supplied by Beckhoff within the AS Stepper Motors series. This motor converts discrete electrical pulses from a matched drive into proportional rotary increments, allowing machinery to index fixtures, valves, or small conveyors to exact positions without closed-loop feedback. Its hybrid construction and NEMA-style frame make it suitable for medium-torque positioning tasks in packaging stations, pick-and-place axes, and other industrial automation applications.
Its mechanical resolution stems from a 1.8° step angle, so one full revolution is subdivided into 200 discrete full steps. A static holding capacity of 5.0 Nm allows the shaft to maintain its load when pulses stop, while the motor windings draw a rated phase current of 5.0 A to achieve that torque without overheating. Continuous electrical input is limited to 68.8 W, balancing thermal rise with duty cycles commonly encountered in indexing tables. The electrical time constant is influenced by a phase inductance of 2.80 mH. This moderate inductance lets the current rise quickly enough for operation at midrange speeds while filtering high-frequency drive switching.
The rotating assembly has a 3.0 kg·cm² rotor inertia, matching the motor to moderate acceleration profiles without significant overshoot. The copper windings have a phase resistance of 0.36 Ω, giving the drive predictable current regulation at low speeds. The shaft can withstand an axial thrust of 60 N and a radial load of 191 N at the bearing face. Preloaded bearings support these loads and are rated for 30,000 hours of service. Dimensional tolerances limit axial backlash to 0.075 mm and radial backlash to 0.025 mm, while positional deviation at standstill remains within ±0.09°. The motor has a mass of 2.85 kg, supporting stable installation in compact machine assemblies.
