AS1060-1100 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The AS1060-1100 is a stepper motor manufactured by Beckhoff and is part of the AS Stepper Motors series. It features a holding torque of 5.0 Nm, a rated current of 5.0 A, and a rated power of 68.8 W. The motor has a flange size of 85.5 mm, weighs 2.85 kg, and operates with an IP20 protection class.
Internal Product Review
The AS1060-1100 is a Beckhoff stepper motor that stands out with 5.0 Nm holding torque and a 1.8° step angle. Electrical characteristics including 5.0 A rated current and 2.80 mH winding inductance support stable drive tuning and consistent positioning behavior. A 30,000 h bearing life makes the motor a strong choice for dependable motion control service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AS1060-1100 is a stepper motor produced by Beckhoff within the AS Stepper Motors series. It is intended for industrial automation tasks that require discrete angular positioning, such as feeding mechanisms or small axis drives. By advancing the rotor in fixed increments, the unit allows controllers to translate command pulses into repeatable shaft movement without a feedback device. This open-loop operating method suits applications with predictable motion sequences and straightforward pulse-based control.
The motor generates a holding torque of 5.0 Nm, providing static load support when power is applied. Each command step corresponds to a mechanical resolution of 1.8°, so 200 full steps result in one complete revolution. The square mounting face measures 85.5 mm across the flange, and the mounting holes are spaced 69.6 mm to align with typical motor brackets. Dynamic response is influenced by a rotor inertia of 3.0 kg·cm², which balances acceleration capability with positional stability. To reach its nameplate torque, the winding draws 5.0 A per phase, and the coils present 2.80 mH of inductance and 0.36 Ω of resistance that must be considered when sizing the drive electronics. The motor has an IP20 protection class, so it is suited for installation inside enclosures with limited airborne contaminants. The main output shaft is 14 mm in diameter, and a 6 mm rear shaft is available for encoders or hand wheels.
The assembled mass is 2.85 kg, keeping overhung load on moving axes low. Axial thrust capability reaches 60 N, so moderate belt or leadscrew preload can be applied without reducing the specified bearing life of 30,000 h. Available output power is 68.8 W, making the motor suitable for indexing tables and small conveyors that demand controlled acceleration rather than continuous high speed. This operating profile fits start-stop motion where holding force and repeatable positioning are more important than maximum speed.
