Product Description:

The AM8562-0P10-0000 is a synchronous servo motor produced by Beckhoff in the AM Synchronous Servo Motors series. It serves as a rotary actuator that delivers controlled torque and speed for positioning axes in industrial automation systems such as pick-and-place modules and gantry drives. The motor is intended for closed-loop operation, so a matching servo amplifier can regulate motion precisely during acceleration, steady travel, and stopping. Its place in Beckhoff’s synchronous servomotor range also supports straightforward integration with PC-based motion platforms used in coordinated machine control.

This model attaches to machinery through a 142 mm flange, and rotor position is fed back by an OCT single-turn encoder that provides absolute angular data for one revolution. Power and signal wiring exit through a rotatable angular connector or terminal box, allowing the interface to be oriented after the motor is mounted so cable routing can better suit the surrounding machine layout. A rotor with an increased mass moment of inertia helps damp load-induced speed fluctuations, which can be useful in indexing applications with intermittent torque demand or changing load conditions. At the drive end, the motor uses a smooth shaft, so torque is transferred through clamp hubs or friction couplings without a keyed connection.

The motor has an overall length code 2, indicating the second mechanical length available in the AM8500 frame. The housing is supplied in the standard version, so no enhanced sealing or special coating is included. It is delivered without a holding brake, which means static load retention must be provided by external hardware or by controlled drive torque when the application permits it. The P winding code identifies the electrical winding configuration used with compatible Beckhoff servo amplifiers. These characteristics help determine mounting space, inertia behavior, and the external holding method required by the axis.