Product Description:

The AM8533-2F10-0000 is a synchronous servo motor produced by Beckhoff within the AM Synchronous Servo Motors series. As a rotary actuator, it delivers precise position and velocity control for packaging lines, pick-and-place axes, and general machine-tool functions that rely on deterministic servo loops. The stator and rotor are built for fast torque development, allowing direct integration with EtherCAT drive technology commonly used in Beckhoff automation platforms. It is well suited for motion tasks that require repeatable starts, stops, and speed changes under closed-loop control.

Electrical connection is handled through a rotatable angular connector or terminal box, so cable exits can be aligned to panel constraints without twisting conductors. Position feedback is generated by an OCT single-turn sensor, delivering absolute angle information for one mechanical revolution for closed-loop commutation in compact axes. A flange diameter of 72 mm matches the IEC mounting pattern for medium-frame gearheads and couplings, while the smooth shaft simplifies direct clamp coupling where keyed interfaces are unnecessary. Because this model is supplied without a holding brake, a stationary load must be secured by drive torque or an external locking device during power loss. Thermal and electrical characteristics follow the F winding designation for continuous cyclic operation.

Dynamic behavior is further influenced by the motor’s increased mass moment of inertia, which helps smooth speed ripple in applications that experience step disturbances or belt tension variations. For environmental protection, a radial shaft-sealing ring with IP65 protection prevents dust ingress and water jets from reaching the bearing set. This sealing arrangement supports use in washdown or machining environments where contamination control is important. The mechanical stack length identified by overall length code 3 balances continuous torque output with overall envelope size, which is useful for mid-power axes with limited cabinet depth or carriage spacing.