Product Description:

The AM8532-1D10-0000 servo motor is produced by Beckhoff within the AM Synchronous Servo Motors series. Serving as a rotary actuator for closed-loop positioning tasks, the unit converts commanded drive current into precise torque and speed for automated machines and material-handling axes used in industrial environments. It is intended for applications that rely on stable motion control, repeatable positioning, and direct integration with a compatible servo drive. This model is supplied in the standard version within the Synchronous Servomotors product family.

The motor uses a 72 mm flange, which supports accurate mounting to machine plates, gearboxes, or other driven assemblies. Power and feedback cabling enter through a rotatable angular connector or terminal box, allowing the cable outlet direction to be adjusted for the available space. Position data are generated by an OCT single-turn encoder, which provides absolute rotor angle within one mechanical revolution to the drive controller. The motor is supplied without a holding brake, so power-off load retention must be handled by external hardware when the application requires the shaft to remain fixed at standstill.

Dynamic response is influenced by the increased mass moment of inertia design, which can help smooth speed variation under changing load conditions while increasing current demand during acceleration. The output shaft follows DIN 6885 and uses a shaft with groove and feather key for secure torque transmission to couplings, pulleys, or similar drive elements. Internal electrical characteristics are identified by winding code D, and the housing length is identified by overall length code 2. These features support installation where shaft security, predictable acceleration behavior, and compatibility with the required motor envelope are important.