AM8113-1F11-0000
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Beckhoff AM8113-1F11-0000 motor from the AM Synchronous Servo Motors series is a permanent magnet-excited three-phase synchronous motor. It features a peak torque of 2.04 Nm and a rated speed of 3000 min-1. The motor uses convection cooling and operates within an ambient temperature range of 5 to 40AC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Beckhoff AM8113-1F11-0000 synchronous servomotor can be installed vertically with the output shaft facing upward or downward. This motor is deployed for compact drive technology. The product is rated as a low-voltage motor. This device delivers highly dynamic drive solutions with a voltage rating of not more than 50 VDC. The units size makes it ideal for use in confined spaces. It should be in the safe state when the related drive system has a fault. This motor supports torque- as well as speed-controlled operation through the manufacturers EtherCAT servo terminal.
The products mounting and installation are permitted only in industrial electrical machines or systems. This device must have an adequate ventilation clearance at its installation site. The unit-related safety instructions must be specifically paid attention to when reading its manual. Its housing can cause burns when the surface temperature is more than 100 AC. This motor encounters derated torque plus current when the installation elevation and operating temperature are higher than 1000 m and 40 AC. The product transport and storage should be carried out only in the horizontal orientation. This devices stator depicts a three-phase winding. The units output shaft is located on side A. It encounters high radial forces when it is driven through toothed belts or pinions.
This motors mating connectors must be bought separately. The product uses its manufacturers preassembled power and feedback cables for connection. This device comprises ball bearings with a grease filling. The units housing must be cleaned with isopropanol or a similar agent. Its feedback system is an OCT encoder with an 18-bit resolution and a single turn. This synchronous servomotors maintenance and cleaning have to be done by qualified personnel.
Frequently Asked Questions about AM8113-1F11-0000:
Q: When should the ball bearings of the AM8113-1F11-0000 motor be checked?
A: The ball bearings of the AM8113-1F11-0000 motor should be checked after every 2,500 hours of operation.
Q: When does the AM8113-1F11-0000 motor encounter axial forces?
A: The AM8113-1F11-0000 motor encounters axial forces when pulleys or pinions are assembled on its shaft or right-angle gears are used.
Q: What type of connector does the AM8113-1F11-0000 motor use for its power supply?
A: The AM8113-1F11-0000 motor uses an angular rotatable connector for its power supply.
Q: What is the function of the holding brake of the AM8113-1F11-0000 motor?
A: The holding brake of the AM8113-1F11-0000 motor blocks the rotor in a de-energized state.
Q: What precautions must be taken when transporting the AM8113-1F11-0000 motor?
A: The components of the AM8113-1F11-0000 motor must not be bent and its insulation clearances must not be altered during transport.
