Product Description:

The AM8113-0F20-0000 is a synchronous servo motor produced by Beckhoff within the AM Synchronous Servo Motors series. Designed for closed-loop positioning and speed control in industrial automation, the unit converts electrical input from a matched drive into precise mechanical motion for packaging, handling, and assembly stations. Its compact geometry supports direct integration on small form-factor machines, allowing high dynamic response while maintaining consistent torque accuracy across repetitive cycles. This type of motor is well suited to axes that need repeatable indexing, stable speed regulation, and fast response during frequent starts and stops.

The motor uses a 40 mm flange that provides a standardized mounting interface for light-duty gearheads or backlash-free couplings. Position data are supplied by the integrated OCT multi-turn encoder, enabling absolute feedback over many revolutions without an external battery. This feedback arrangement helps the drive retain position information after power cycling and supports accurate motion recovery. Power and signal conductors exit through a rotatable angular connector, so cable routing can be aligned after the motor is mounted. A smooth shaft supports backlash-free clamping hubs, and the compact connection layout helps reduce cable strain in confined machine spaces. The winding code F indicates the electrical values matched to the corresponding Beckhoff servo drive so that thermal limits are not exceeded during continuous cyclic loading.

The motor has overall length code 3, which indicates a short housing that helps conserve axial space in multi-axis gantries and other compact installations. It is supplied without a holding brake, so vertical or safety-critical axes require external holding force or a controlled stopping method when power is removed. The delivery state is the Standard version, which means no additional sealing rings or reinforced bearings are installed. This configuration is suitable where the machine does not require upgraded sealing or bearing options.