Product Description:

The AM8063-1N10-0000 is a synchronous servo motor produced by Beckhoff within the AM Synchronous Servo Motors series. It supplies controlled torque and position for packaging machines, pick-and-place axes, and other CNC subsystems. When connected to a compatible servo amplifier, the motor supports precise speed regulation, commanded acceleration, and repeatable positioning during cyclic motion. The motor is offered as a standard configuration for use with AX drive controllers, which convert electrical commands into rotary motion with high repeatability.

The motor uses an OCT single-turn encoder that conveys absolute position information to the controller within one revolution, so the control system can read shaft position immediately at startup. Its square mounting interface follows a flange diameter of 142 mm, allowing installation in machines built around the IEC flange pattern. Electrical terminations can be made through a rotatable angular connector or terminal box, so cabling can leave the housing in the direction that best fits the installation. The unit is supplied without a holding brake, so external clamping or drive torque must hold the load when power is removed. Mechanical key geometry on the shaft follows the DIN 6885 standard, supporting compatibility with common couplings and pulleys.

In addition to the keyed interface, the shaft is delivered as a shaft with groove and feather key, which helps prevent slip under reversing loads. Internal copper layout and lamination length correspond to winding code N, which sets the current constant and thermal behavior for this frame. The physical stack height is identified by overall length code 3, giving a moderate inertia option within the AM8000 family for balanced acceleration and running stability. The motor is supplied in the Standard version, which indicates the regular production configuration without special options.