Product Description:

The AM8062-0L21-0000 is a synchronous servo motor produced by Beckhoff within the AM Synchronous Servo Motors series. Classified as a Standard version, the unit provides regulated rotary power for axes that require high accuracy in automated assembly lines, packaging stations, and machining centers. Its servo design supports closed-loop operation, allowing controllers to command precise position and velocity profiles during continuous or cyclic duty cycles and to maintain stable motion during repeated starts, stops, and speed changes.

Mechanically, the motor mounts to gearboxes or machine frames through a square flange that measures 142 mm on each side, and it drives loads through a smooth 32 k6 shaft that projects 58 mm beyond the housing. The overall length code 2 and winding code L correspond to the internal coil arrangement used for this motor size and help balance output with manageable heat generation. During normal operation, the rotor reaches a rated speed of 3000 rpm and delivers 4.78 kW of shaft power with a continuous torque of 15.2 Nm. For brief acceleration or load surges, it can supply a peak torque of 74.2 Nm, while standstill torque remains available at 21.1 Nm with 12.4 A of current.

A spring-applied brake operates at 24 VDC and can hold between 20 Nm and 36 Nm, helping keep vertical or indexing axes in place when power is removed. Power is connected through the motor interface, and OCT multi-turn feedback returns absolute position data over multiple revolutions for accurate position tracking after startup. The torque constant of 1.70 Nm/A supports straightforward current-to-torque scaling, while rotor inertia with brake is 22.30 kgcm², which affects how quickly the motor can change speed. The assembled motor, including the brake, weighs 15.40 kg and remains manageable for installation in typical machine assemblies.