Product Description:

The AM8053-0K00-0000 synchronous servo motor is manufactured by Beckhoff and belongs to the AM Synchronous Servo Motors series. It functions as a rotary actuator in closed-loop motion systems, delivering controlled torque and speed to gantries, feeders, and handling modules used throughout automated production lines. With permanent-magnet excitation and stator windings optimized for rapid current rise, the unit integrates directly with Beckhoff drive controllers where its position feedback supports precise electronic commutation and stable speed regulation during repeated motion cycles.

Mechanical installation uses a flange diameter of 104 mm, which mates with gearboxes and mounting plates in the corresponding IEC size class. Power and feedback conductors are routed through a rotatable angular connector or terminal box, so the exit direction can be aligned with surrounding cabinet or machine wiring. Rotor position is reported by a two-pole resolver, providing angle information with high noise immunity for servo control loops. The output end uses a smooth shaft, favoring clamp couplings and simplifying washdown cleaning. The motor is supplied without a holding brake, so static load retention must be achieved through the drive or an external mechanical device when the axis is at rest.

The motor is a Standard version, indicating the conventional temperature rise and torque density used in this family. Its stator winding uses code K, which identifies the electrical characteristics required from the paired inverter. An overall length designation of 3 indicates the third housing length in the frame and provides additional active copper for higher continuous torque than shorter bodies. The motor belongs to the Synchronous Servomotors product group and uses permanent-magnet excitation with electronic commutation. No special sealing, cooling, or stainless adaptations are included.