Product Description:

The AM8051-0G00-9000 is a synchronous servo motor produced by Beckhoff as part of the AM Synchronous Servo Motors series. Within an automation cell, this motor converts regulated electrical power from a servo drive into precise mechanical rotation, enabling coordinated motion of slide tables, feeders, or indexing plates. Its design targets installations where fast acceleration, repeatability, and a compact form factor are required, such as packaging machines or small gantries. The part’s mechanical dimensions follow IEC conventions so it can be mounted on standard adapters with minimal alignment work.

Its interfaces support flexible wiring and easy installation. The power and feedback leads exit through a rotatable angular connector or terminal box, so cable orientation can be set after mounting. A 104 mm flange sets the bolt circle and keeps the housing aligned with mid-range gearheads. Position is measured by a two-pole resolver, which tolerates temperature changes and electrical noise. The output is a smooth shaft, easing backlash-critical couplings. Because the unit is supplied without a holding brake, static load retention must be handled by the drive or an external lock.

The remaining design codes clarify integration with existing Beckhoff hardware. It belongs to the Standard build level, meaning the housing features and thermal limits match the common configuration in the AM family. Overall length code 1 denotes the shortest stator stack available for this flange size, allowing the motor to fit tight axial spaces. The mechanical interface marked AM3x5x compatible flange and shaft matches the mounting and shaft format used in earlier AM3 motors. Finally, winding code G indicates the stator turns and impedance used with medium-voltage AX servo inverters for balanced current utilization.