Product Description:

The AM8043-1E10-0000 is a synchronous servo motor produced by Beckhoff for the AM Synchronous Servo Motors series. It is intended for use with AX drive controllers to provide precise angular positioning, stable speed regulation, and rapid cyclic motion in automated machinery and material-handling axes. The motor belongs to the synchronous servomotor class, so feedback-based control can maintain accurate rotor alignment during dynamic axis movement. Its synchronous design lets the drive regulate torque and position with low lag during repeated starts, stops, and reversals.

It mounts with a 87 mm flange size, which fits standard machine interfaces while keeping the rotor centered. Connections for power, encoder, and thermal sensors are routed through a rotatable angular connector or terminal box, allowing the cable exit direction to be adjusted to suit the machine layout. Rotor position is detected by an OCT single-turn feedback system, which provides absolute position data for commutation after each power cycle and supports closed-loop motion control during operation. The motor is supplied without a holding brake, so a vertical or suspended load must be secured by external means when power is removed. Output torque is transmitted through a shaft with a groove and feather key, giving a positive mechanical connection for couplings or hubs that must resist slip under load.

This configuration is identified by the overall length code 3, which places the motor in the third housing length of the family and provides more active material than shorter versions. The winding code E sets the electrical matching for voltage, current, and speed when the motor is paired with compatible amplifiers. The keyway dimensions follow DIN 6885, allowing standard mating hubs to fit the shaft without custom machining. The motor is supplied in the standard version, which indicates the baseline configuration rather than a special build with added options.