AM8033-0F10-0000
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The AM8033-0F10-0000 from Beckhoff is a standout in the AM Servo Motor Series, designed as a permanent magnet-excited three-phase synchronous motor. This motor boasts a rated power of 1.70 kW, a standstill torque of 3.22 Nm, and peak torque reaching 17.71 Nm. It operates between +5 to +40°C and is approved with CE, cURus, and EAC markings.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
AM8033-0F10-0000 is a Beckhoff three-phase synchronous servo motor. The motor is part of the AM8000 series, which are brushless motors with permanent magnet rotors. Electronic commutation provides an effective, reliable, and safe solution for commutation. This motor feature reduces maintenance requirements and improves motor operating reliability. Integrated winding temperature monitoring prevents overheating caused by overload conditions. The motors require 5 to 40 degrees Celsius ambient temperature and 0 to 1000 meters elevation for rated output. Derated operation is permitted but not recommended. The motors are designed for flange mounting. The AM8033-0F10-0000 motor has a 72 millimeter flange. The main shaft is smooth and a single turn encoder provides real-time feedback. With flange mounting, the supported positions for mounting are IM B5, IM V1, and IM V3.
The aluminum housing is protected by a grey powder coat. Protection category of the AM8033-0F10-0000 motor is IP54. The nominal input voltage range is 100 to 480 Volts AC. Standstill torque for the servo motor is 3.22 Nm. Standstill current for the servo motor is 4.10 Amps. The nominal speed at 400 Volts is 6000 RPM. Power output rating of the servo motor is 1.7 kilowatts. Peak output values for the torque and current are 17.71 Nm and 24.6 Amps. The rotor moment of inertia is 1.23 kg cm2. iTEC plug technology provides a reliable connection for power transmission from the servo drive and for feedback transmission to the servo drive. The motor is approved and certified by EAC, CE and cURus. Only trained personnel with relevant experience should operate the motor. To prevent electric shock, the DC link capacitors must be discharged prior to working on it.
Frequently Asked Questions about AM8033-0F10-0000:
Q: What is the motor shaft design?
A: The motor has a smooth shaft.
Q: Is a holding brake installed?
A: A holding brake is not installed on the motor.
Q: What is the motor flange size?
A: The motor flange size is 72 millimeters.
Q: What type of feedback device is installed on the motor?
A: A single turn encoder is installed on the motor.
Q: What is the motor weight?
A: Weight of the motor is 3 kilograms.
