AM8032-0E10-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff AM8032-0E10-0000 is a standard synchronous servo motor in the AM Synchronous Servo Motors series. It features a 72 mm flange size, a smooth shaft design, and is equipped with an OCT single-turn feedback type. This motor comes without a holding brake and uses a rotatable angular connector or terminal box for connection.
Internal Product Review
The AM8032-0E10-0000 is a Beckhoff synchronous servomotor with a standard configuration and smooth shaft design. OCT single-turn feedback and a rotatable angular connector give the unit precise signal handling and convenient machine integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AM8032-0E10-0000 is a synchronous servo motor produced by Beckhoff and assigned to the AM Synchronous Servo Motors series. It converts electrical energy into accurately regulated mechanical motion for indexing tables, pick-and-place axes, and other machinery that requires deterministic positioning. Integrated motor feedback allows the connected drive to monitor rotor position and correct motion errors during operation. The low moment of inertia associated with this frame size supports rapid acceleration and deceleration while reducing the torque required for dynamic movement. These characteristics allow the motor to follow high-bandwidth command profiles while maintaining accurate positioning in automated production equipment.
A flange dimension of 72 mm provides the mounting interface and allows the motor to connect directly to compact gearboxes or adapter plates without additional spacers. Power and signal conductors exit through a rotatable angular connector or a terminal box, allowing the connection point to be oriented toward the machine frame or cable track. Rotor position is captured by the integrated OCT single-turn encoder, which provides absolute angle information through Beckhoff’s One Cable Technology link. This feedback arrangement combines motor power and encoder communication in a coordinated connection system while eliminating the need for incremental homing after normal power cycles. The motor has a smooth shaft, so torque can be transferred through a clamping coupling without the vibration associated with a keyed joint. It is supplied without a holding brake, so static load retention must be maintained electrically or by an external clamp when the motor controls a vertical load.
The motor has an overall length code of 2, indicating the second-shortest stator assembly in the 80 mm motor family. This housing length provides moderate rotor inertia that supports rapid indexing while maintaining sufficient torque capacity for compact automation axes. Its electrical characteristics follow winding code E, which matches the motor’s current and voltage requirements to compatible midrange AX5000 servo drives. The motor is supplied as the standard version without special coatings, seals, or reinforced bearings. Compatible drive parameters account for the winding data, encoder response, and motor thermal behavior during closed-loop operation. Proper parameter selection allows the drive to regulate current, speed, and position without requiring unusual control settings or customized tuning methods.
