AM8031-1C20-0000
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The AM8031-1C20-0000 is a permanent magnet-excited three-phase synchronous motor with a peak torque of 6.10 Nm. Beckhoff manufactures this motor as part of their AM Servo Motor Series, featuring a rated speed of 3000 min^-1. It incorporates convection cooling and supports connection technology via itec® plug.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AM8031-1C20-0000 is a compact brushless AC synchronous motor that runs at a nominal speed of 3000 rpm. At this working speed, the supply RMS voltage is 400 VAC, while the shaft reaches a nominal torque and output power of 1.34 Nm and 0.42 kW. Whenever the machine’s supply voltage changes, the output of the motor and the working speed also change. Specifically, the speed and power tend to increase or decrease with the voltage supply, while the torque tends to fall at higher values of the supply voltage. At 115 V, the AM8031-1C20-0000 achieves a rotor speed of 400 rpm, a torque of 1.36 Nm, and a power of 0.06 kW.
During the locked-rotor test, the standstill values of the motor can be achieved. The datasheet for the AM8031-1C20-0000 specifies a standstill torque and current of 1.37 Nm and 1 A. For high-speed systems, the AM8031-1C20-0000’s shaft may operate at a maximum revolution rate of 10,000 cycles per minute. Whenever the AM8031-1C20-0000 operates continuously, its temperature rises due to losses. For AC motors, the losses arise both from the mechanical and electrical side of the motor. During operation, losses along the motor’s electrical side arise from the copper and core losses. For brushless motors like the AM8031-1C20-0000, losses on the mechanical side are minimal since few mechanical parts are in contact during operation.
The AM8031-1C20-0000 incorporates a groove and feather key on its output shaft. The feather key is desirable for minimizing losses during torque transmission between the shaft and the load. Aside from maximizing torque and power transfer, the feather key also allows relative sliding between the shaft and the hub. To get the AM8031-1C20-0000 at a reasonable price and with an exclusive warranty, request a quotation now at Wake Industrial.
Frequently Asked Questions about AM8031-1C20-0000:
Q: What are the peak parameters of the AM8031-1C20-0000?
A: The AM8031-1C20-0000 can attain a peak torque and current draw of 6.1 Nm and 5.5 A, respectively.
Q: What type of holding brake does the AM8031-1C20-0000 have?
A: The AM8031-1C20-0000 does not employ any type of holding brake. The motor variation that has a brake and exhibits the same characteristics as the AM8031-1C20-0000 is the AM8031-1C21-0000.
Q: What mounting positions are suitable for the AM8031-1C20-0000?
A: The AM8031-1C20-0000 supports all types of variations for installations through its flange.
Q: What type of mounting bolts are best for the AM8031-1C20-0000?
A: During mechanical installation, the AM8031-1C20-0000’s bore diameter must be 6 mm each, and the bolts must have a size of M5 x 16.
Q: How often does the AM8031-1C20-0000’s ball bearing must be replaced?
A: Ideally, the AM8031-1C20-0000’s ball bearing should last as long as the motor’s lifespan. However, regular checks and maintenance must be done to ensure good working conditions of the bearing. The recommended interval for the ball bearing maintenance is 30,000 operating hours.
