AM8031-0D11-0000
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The AM8031-0D11-0000 motor boasts a standstill torque of 1.38 Nm, a peak current of 10.7 A, and a rated speed of 6000 min⁻¹, using convection cooling. As part of the AM Servo Motor Series from Beckhoff, it integrates an OCT motor feedback system and operates optimally within an ambient temperature range of +5 to +40 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
AM8031-0D11-0000 is a servo motor. It is designed and produced by Beckhoff Automation. The motor is part of the AM8000 series of motors. These are brushless motors with electronic commutation for switching current in the motor windings. A name plate on the motor lists important information. Operators must verify this information at the time of delivery. The motor has a compact housing made of aluminum that complies with IP54 protection class. This rating indicates that some dust can enter, but it will not interfere with motor operation, and that the motor is protected against splashes of water from all directions. The motor housing has a flange for mounting. This is a flat plate with holes for mounting screws. Size of the flange on the AM8031-0D11-0000 tor is 72 millimeters.
The main shaft has a smooth design. Other shaft designs, including shafts with feather key and shaft seal, are available. Multiple options for the feedback system are available, such as resolvers, single turn and multi turn encoders. The encoders are available with different resolutions for different application requirements. The AM8031-0D11-0000 motor has a single turn encoder. The motor supports one cable technology (OCT), which obviates the need for a separate feedback cable, saving cabling and installation costs. The motor works over a wide AC input range. At 400 Volts AC input, is performance specifications include 1.38 Nm standstill torque, 1.33 Nm rated torque, 6.07 Nm peak torque, 6000 RPM> speed rating, 0.84 kilowatts rated power, 1.95 Amps rated current, 10.7 Amps peak current and 0.71 Nm/A torque constant. The motor cools via <
Frequently Asked Questions about AM8031-0D11-0000:
Q: What is the motor shaft design?
A: The motor has a smooth shaft.
Q: What type of feedback device is installed on the motor?
A: A single turn encoder is installed on the motor.
Q: What is the motor flange size?
A: The motor flange size is 72 millimeters.
Q: Is a holding brake installed?
A: A holding brake is installed on the motor.
Q: Which cooling method does the motor support?
A: The motor uses convection cooling for heat dissipation.
