AM8023-2E11-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
30 Seconds
The Beckhoff AM8023-2E11-0000 is a synchronous servo motor from the AM Synchronous Servo Motors series. It is equipped with a 24 VDC holding brake and features a flange size of 58 mm and smooth shaft design. The motor uses OCT single-turn feedback and includes a radial shaft-sealing ring with IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AM8023-2E11-0000 is a synchronous servo motor produced by Beckhoff as part of the AM Synchronous Servo Motors series. Designed for closed-loop motion tasks in pick-and-place units, gantries, and packaging lines, the unit converts commanded current from a drive into tightly regulated torque and position. Within an automation cell, it acts as the mechanical actuator that moves a connected load according to commands from the motion controller. The motor is the standard version of this product type and uses the established mechanical profile for Beckhoff synchronous servomotors.
The motor has a flange diameter of 58 mm, allowing direct attachment to compact gearboxes and machine plates. Power is transmitted through a smooth shaft, so clamp or wedge couplings can transfer torque without requiring a keyed hub. The encoder uses OCT single-turn technology to provide absolute position information within one mechanical revolution while reducing the number of required cables. Wiring enters through a rotatable angular connector or an optional terminal box, allowing the cable outlet to be aligned with the available installation space. Dynamic stopping and stationary holding are supported by a brake energized with 24 VDC. This common control voltage allows the brake to operate with standard industrial control circuits.
The electromagnetic section uses an E winding, which matches the motor to drives capable of supplying its required current and voltage. The housing has overall length code 3, providing space for the active motor components while maintaining a compact installation depth. The integrated brake clamps the shaft with 2 Nm of holding torque, helping prevent vertical loads from drifting when motor power is removed. The front bearing seat includes a radial shaft-sealing ring rated IP65, which protects internal components from dust and low-pressure water jets. The sealing ring also helps prevent contaminants from reaching the bearing area in splash-prone machinery. The motor’s compact flange, adjustable cable outlet, and sealed shaft interface support installation in space-constrained automated equipment.
