Product Description:

The AM8023-0E10-0000 is a synchronous servo motor produced by Beckhoff and positioned within the AM Synchronous Servo Motors series. Designed for closed-loop motion axes in assembly, packaging, and material-handling equipment, the unit converts electrical energy from a matching drive into precisely regulated torque and speed. When paired with EtherCAT or conventional drive controllers, the motor supports deterministic positioning that meets cycle-time requirements typical of multi-axis gantries and pick-and-place heads. This makes it suitable for synchronized axes that must accelerate, stop, and repeat motion with little tracking error.

The mechanical interface starts with a 58 mm flange, providing a standardized pilot diameter for gearboxes or direct-drive couplings. Electrical terminations can pivot because the housing carries a rotatable angular connector that may be exchanged for a terminal box, simplifying cable routing in tight cabinets. Position data are returned to the controller by an OCT single-turn feedback system, which combines motor power and feedback transmission in one cable. For installations where static holding torque is generated by the drive itself, the motor is specified without a holding brake, reducing mass and maintenance. Overall length follows length code 3, yielding a medium stack suitable for moderate continuous torque.

The device belongs to the Synchronous Servomotors product group and carries a standard version designation, so sealing, insulation, and vibration limits follow the baseline requirements of the series. The rotor exits the housing with a smooth shaft, allowing force transmission through clamp or friction couplings when backlash must be minimized. Electrical behavior depends on the internal winding, identified here as winding code E; this code corresponds to phase resistance and inductance values used with mid-range drive amplifiers and supports quick current rise.