AM8022-3D10-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff AM8022-3D10-0000 is a standard synchronous servo motor from the AM Synchronous Servo Motors series. It features a 58 mm flange size, a shaft with groove and feather key, and a radial shaft-sealing ring rated at IP65. The motor comes without a holding brake and uses an OCT single-turn feedback type, with a rotatable angular connector or terminal box for connection.
Internal Product Review
The AM8022-3D10-0000 is a Beckhoff synchronous servomotor with OCT single-turn feedback and a standard motor configuration. A shaft with groove and feather key paired with an IP65 radial shaft-sealing ring supports dependable mechanical integration in servo assemblies. The rotatable angular connector option streamlines installation and makes the servomotor a strong choice for clean, accurate motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AM8022-3D10-0000 synchronous servo motor is produced by Beckhoff and belongs to the AM Synchronous Servo Motors series. Within an automation cell, the motor converts commanded phase currents into tightly regulated shaft movement. This operation allows pick-and-place heads, carton formers, and indexing tables to follow repeatable velocity and position profiles. The mechanical interface uses a flange measuring 58 mm, providing a standard mounting surface for compatible gearboxes and direct-drive couplings.
Electrical power and feedback leave the housing through a rotatable angular connector or terminal box. The adjustable outlet allows cables to be directed toward the control cabinet without tight bends that could place unnecessary strain on the connections. Rotor position is monitored by an OCT single-turn encoder, so the drive receives an absolute position value within each mechanical revolution and can recover that position after a power cycle. The motor is supplied without a holding brake, so drive torque or an external locking device must keep the connected load stationary when power is removed. Output torque is transferred through a grooved shaft with a feather key, providing positive engagement between the motor shaft and the driven component. This keyed interface is suitable for couplings, pulleys, and gearboxes that require secure torque transmission during repeated acceleration and deceleration.
A radial shaft-sealing ring rated IP65 protects the shaft opening against dust and low-pressure water jets, allowing the motor to operate outside a separate protective enclosure when installation conditions are appropriate. Electromagnetic operation follows winding code D, which establishes the voltage constant and rated current used when pairing the motor with a compatible AX5000 series drive. The motor has a stack length identifier of 2, indicating an active lamination height that balances rotor inertia and continuous torque for applications within this frame range. The unit is the Standard version of the series. Its baseline dimensions, paint finish, and connector arrangement follow the standard configuration used for this AM80-class motor.
