AM8012-0ch0-1001 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
24 Seconds
The Beckhoff AM8012-0ch0-1001 is a synchronous servo motor from the AM Synchronous Servo Motors series. It features a smooth shaft, 40 mm flange size, and does not include a holding brake. This motor is designed as a standard type with a special version designation and overall length code 2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AM8012-0ch0-1001 is a synchronous servo motor produced by Beckhoff and supplied within the AM Synchronous Servo Motors series. With a permanent-magnet rotor and electronic commutation, the motor provides finely regulated motion for pick-and-place heads, indexing tables, and miniature conveyor axes. It converts drive commands into precise angular displacement, enabling closed-loop position and velocity control wherever compact but responsive actuation is required in automated assembly, inspection, or packaging equipment. The electronic drive regulates current according to feedback signals, allowing the connected axis to respond accurately to changing speed and position commands.
Mounting is provided by a 40 mm square flange, allowing the motor to bolt directly to lightweight gearboxes or adapter plates without intermediate brackets. Because the unit is delivered without a holding brake, external mechanical locks or drive torque must maintain the load position after power is removed. The winding and feedback configuration correspond to the Standard motor series type, so the electrical parameters follow the baseline performance curves for this motor configuration. Its compact mounting interface makes the unit suitable for machinery with limited installation space, while direct attachment helps maintain alignment between the motor shaft and the driven component. Proper support for suspended or vertical loads is necessary because the motor does not provide mechanical holding force when it is unpowered.
The output interface uses a smooth shaft, facilitating low-backlash coupling with clamp hubs or friction-fit gear wheels. The motor has length code 2, which provides a short housing and low rotor inertia for faster acceleration with small loads. The model is a special version, indicating that certain mechanical or electrical features differ from the standard configuration while remaining compatible with the wider Synchronous Servomotors platform. Clamp-style couplings can transmit torque without a shaft key, provided that the coupling is installed with the correct clamping force. The short body also helps reduce the distance between the mounting surface and the driven mechanism in tightly arranged equipment. Miniature linear stages and compact transmission assemblies can be connected where responsive motion is more important than an onboard brake.
