AM3065-0NA1-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
44 Seconds
The Beckhoff AM3065-0NA1-0000 is a standard motor in the AM Synchronous Servo Motors series with a 142 mm flange and smooth shaft design. It features a 24 VDC holding brake with a holding torque range of 20 Nm to 36 Nm and offers OCT single-turn feedback with a 23-bit resolution. The motor supports rotatable angular connector or terminal box connections.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AM3065-0NA1-0000 is a synchronous servo motor built by Beckhoff for the AM Synchronous Servo Motors series. Classified as a standard version unit, it supplies precise torque and velocity control for coordinated axes in factory automation cells, packaging lines, and material-handling systems. As a synchronous servo motor, it is intended for controlled rotary motion where stable speed regulation and accurate positioning are required during repeated machine cycles. Its thermal design matches moderate duty cycles often found in pick-and-place feeders, CNC auxiliary drives, and carton erectors, where compactness and repeatability are important.
Its holding brake is energized at 24 VDC, so emergency stops can be supported with a low-voltage supply shared across field devices. Power and signal lines exit through a rotatable angular connector, and the connector position can be adjusted to ease cable routing in compact enclosures. The integrated encoder provides 23-bit resolution and uses OCT single-turn sampling to report absolute rotor position to the drive within one mechanical revolution. A 142 mm square flange aligns with standard IEC mounting faces and supports straightforward installation on matching machine interfaces. Depending on the selected length variant, the holding brake sustains static loads from 20 Nm to 36 Nm, reducing the need for external clamps on vertical axes.
The mechanical interface uses a smooth shaft that mates with backlash-free clamping hubs, minimizing wear from repeated starts and stops. Beckhoff assigns the winding identifier N. This winding sets the electrical constants so the motor can pair with standard AX5000 inverters without derating. The smooth shaft also favors friction-locked couplings over keyed connections, which helps preserve alignment during frequent reversals and short indexing moves.
