Product Description:

The AM3065-0N30-0000 is a synchronous servo motor produced by Beckhoff for the AM Synchronous Servo Motors series. Within an automation cell, it delivers regulated torque and speed to positioning axes such as pick-and-place arms and gantry carriages. Its integration with compatible drive controllers enables precise motion sequences that can replace pneumatic stops and increase machine throughput.

Electrical connectivity is available through a rotatable angular connector or, alternatively, a terminal box, allowing the cable outlet to be oriented for restricted installation spaces. Rotor position information reaches the drive through a Hiperface single-turn encoder with 128 SinCos periods from the F6 family. This sine-cosine format supports fine interpolation while retaining absolute position information over one mechanical revolution. The mechanical interface uses a 142 mm flange, allowing the frame to bolt directly to compatible IEC gearboxes or mounting plates. Because the motor is supplied without a holding brake, any power-off shaft locking must be provided externally. A smooth shaft simplifies the use of press-fit couplings and helps minimize torsional backlash in high-precision assemblies.

The electrical layout uses winding code N, which balances rated speed with moderate current demand for mainstream servo drives. This winding code aligns with the motor data available in compatible Beckhoff controller libraries, simplifying drive configuration and operation. The motor uses thermal sensor conventions, encoder scaling, and mechanical tolerances that are consistent with adjacent frame sizes in the same product line. It is supplied in a standard version, so its sealing, paint, and bearing options remain at the baseline configuration. This configuration is intended for installation in cabinets or protected machine areas with normal industrial cleanliness and operating temperatures.