Product Description:

The AM3062-1M40-0000 servo unit is manufactured by Beckhoff within the AM Synchronous Servo Motors series. It is a permanent-magnet, three-phase actuator designed to convert electrical energy from a drive into tightly regulated angular motion for packaging lines, pick-and-place modules, and material-handling axes in industrial automation. Its synchronous servo design supports accurate speed regulation and repeatable positioning during rapid start-stop duty, which is common in indexing stations and transfer systems. When paired with an AX control platform, the motor supplies cyclic torque and position feedback so coordinated multi-axis motion can be carried out with minimal latency.

This model incorporates a 142 mm flange size that matches standard planetary gearboxes and mounting interfaces. Power and signal cables exit through a rotatable angular connector or a terminal box, allowing the conductors to be routed in the direction that best suits the available cabinet space. Rotor position is monitored by a Hiperface multi-turn 128 SinCos from F6 sensor, giving the drive absolute position information over 128 revolutions for quick startup homing. The motor is supplied without a holding brake, so mechanical load retention must be handled externally when power is removed. A shaft with groove and feather key transmits torque and helps prevent slip between the rotor and the coupled load.

The motor uses winding code M, which indicates the electrical winding arrangement expected by compatible Beckhoff drives. It also has overall length code 2, which indicates the housing depth used for this motor version. Keyway geometry follows DIN 6885, allowing the shaft to match commonly available keyed hubs and couplings. The unit is a standard motor series type and is offered in the Standard version. This indicates a regular production configuration rather than a special build, so the motor follows the usual AM-series layout for mounting and electrical integration.