Product Description:

The AM3062-0M41-0000 is a synchronous servo motor produced by Beckhoff. It belongs to the AM Synchronous Servo Motors series and is supplied as a standard version. The motor is intended for precise position and speed control on automated axes used in packaging machines, pick-and-place units, and material-handling cells. In automated machinery, it converts electrical drive commands into controlled rotary motion for positioning, transfer, and indexing tasks.

A flange diameter of 142 mm establishes the mounting interface for gearboxes or direct coupling. Inside, winding code M indicates the coil characteristics required by the matching Beckhoff inverter. Position feedback is provided by a Hiperface multi-turn 128 SinCos encoder from the F6 family, delivering absolute rotor angle over multiple revolutions for closed-loop control. That feedback allows the drive to retain position information through multiple turns while maintaining stable axis regulation. The electromechanical brake circuit operates at 24 VDC, matching common safety-relay supply voltages. A smooth shaft output reduces fretting on clamped hubs and permits effective sealing against contaminants. Because no keyway is machined, torque transfer depends on clamping friction at the hub interface.

The motor uses Overall Length Code 2, which indicates the stator stack length and affects continuous torque capability. During power-off conditions, the integrated 24 V holding brake arrests the rotor, while the available 20 Nm to 36 Nm of holding torque secures suspended or unbalanced loads, depending on length selection. Field wiring is simplified by a rotatable angular connector or terminal box, allowing cable exits to be oriented to suit the cabinet layout. This arrangement helps keep wiring paths clear where space around the motor is limited. The motor is a standard type, so its insulation system, thermal ratings, and mechanical dimensions follow Beckhoff's baseline configuration for general-purpose motion axes.