Product Description:

The AM3054-0K40-0000 is produced by Beckhoff and belongs to the AM Synchronous Servo Motors series. It functions as a drive element that converts drive-controller output into rotary motion for precise axis control in automated equipment such as pick-and-place modules, gantry axes, and feed rollers. Its synchronous design supports repeatable starts, stops, and speed changes in applications that depend on accurate path control. That response is useful on axes that make frequent reversals, short indexing moves, or synchronized feed adjustments during normal machine cycles.

Connection is made through a rotatable angular connector or terminal box, so cable entry can be oriented to match cabinet layouts and then locked in place. Rotor position is reported by the Hiperface multi-turn 128 SinCos from F6 encoder, which provides absolute multi-turn data along with high-resolution SinCos tracks for velocity feedback. A flange diameter of 104 mm follows IEC dimensions, allowing direct mounting to standard gear units and mechanical adapters. The motor uses length code 4, giving it a mid-length housing that balances inertia and continuous torque density. Electrical characteristics follow K winding data, matching phase resistance and inductance to the mid-voltage range used by compatible AX drive families.

The shaft is supplied as a smooth shaft, favoring backlash-free clamp couplings and simplifying removal during maintenance of line-shafted machinery. Because the unit ships without a holding brake, static loads must be secured by the drive controller or an external clamp during power-off periods. The motor uses the Standard version, so its bearings, seals, and insulation follow the common platform used across the family. This shaft style also avoids keyway play at the coupling interface. Consistent encoder scaling and winding data help different frame sizes behave predictably when they operate on the same machine.