Product Description:

The AM3053-0K00-000 is a synchronous servo motor produced by Beckhoff and assigned to the AM Synchronous Servo Motors series. The model serves as an electromechanical actuator that converts drive controller output into rotational movement for automated transport, positioning, and processing stations. By combining permanent-magnet excitation with stator windings optimized for the assigned current range, the unit supports repeatable velocity control and rapid torque buildup for packaging cells, small gantries, woodworking centers, and other rotary axes that cycle frequently. It is intended for motion applications where the connected drive must regulate acceleration, deceleration, and steady-state speed with consistent response.

The motor fastens to machinery with a 104 mm flange, a diameter that sets the bolt pattern and provides a thermal path to the mounting surface. Position data is delivered by a two-pole resolver, providing rotor angle feedback with good resistance to electrical noise. Torque is transmitted through a smooth shaft, so clamping couplings can be used without key slots, and the plain shaft profile simplifies coupling selection in compact machine layouts. Because the device is supplied without a holding brake, any static load must be secured by the drive or external hardware when power is removed. The stator uses winding code K, which corresponds to the resistance and current range used with compatible inverters so the electrical match remains within the expected operating window.

The housing corresponds to overall length code 3, giving a mid-length option that balances continuous torque capability with installation depth. This housing length provides more active motor volume than shorter housings while keeping the same general mounting concept. As part of the standard motor series, it uses accessory options such as ready-made power cables and flange gaskets that are used across the AM family. It is a standard version without special coatings, cooling jackets, or reinforced bearings. That keeps the build aligned with the base motor configuration used for general industrial service.