AM3053-0G30-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff AM3053-0G30-0000 is a synchronous servo motor from the AM Synchronous Servo Motors series. It features a 104 mm flange size, smooth shaft design, and uses a rotatable angular connector or terminal box for connection. The motor uses Hiperface single-turn 128 SinCos feedback and is produced without a holding brake.
Internal Product Review
The AM3053-0G30-0000 is a Beckhoff synchronous servomotor in a standard configuration with a smooth shaft. Hiperface single-turn 128 SinCos feedback and a rotatable angular connector support accurate position control and convenient machine integration. A well-executed motor for precise servo applications, especially where installation flexibility matters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AM3053-0G30-0000 is a three-phase synchronous servo motor produced by Beckhoff for the AM Synchronous Servo Motors series. It converts regulated inverter current into precise rotary motion for positioning stages, conveyor sections, and fast packaging axes in industrial automation. The motor is intended for coordinated motion systems where stable torque production and predictable speed response are needed across changing loads. That behavior is useful on indexing, transfer, and feed motions that require repeatable starts, stops, and speed changes during continuous machine cycles.
Mechanical mounting uses a flange diameter of 104 mm, which sets the centering face and bolt pattern at the machine interface. For cabling, the motor can be ordered with either a rotatable angular connector or a terminal box, allowing the power and feedback leads to be routed to suit the available space around the axis. Position data is supplied by a Hiperface single-turn 128 SinCos encoder, so the drive receives analog sine and cosine signals for interpolation, speed feedback, and commutation. The output uses a smooth shaft, which works well with clamp-style couplings and avoids the stress concentrations associated with a keyed shaft. Because feedback and power routing are integrated into the chosen connection style, cable movement can be managed more easily near rotating elements.
Electrical configuration is identified by winding code G, indicating a coil arrangement suited to moderate current and voltage levels while keeping copper losses under control. The housing uses overall length code 3, which gives the motor a mid-length stack that helps limit overhang on compact gantries and transfer axes. The motor is supplied without a holding brake, so a vertical or suspended load must be secured by drive torque or an external locking device when power is removed. It is built in the standard version, which indicates a baseline configuration rather than a special mechanical or sealing option. This baseline configuration uses the common thermal sensing, mounting tolerances, and sealing arrangement found across the product family.
