Product Description:

The AM3052-0M01-0000 is a synchronous servo motor manufactured by Beckhoff for the AM Synchronous Servo Motors series. It is designed for precision motion axes in assembly cells, pick-and-place gantries, and small machining centers, where the motor supplies controlled torque and speed under feedback from the drive controller. The combination of integrated stator windings, a permanent-magnet rotor, and a compact housing supports responsive motion in tightly spaced machine layouts. It is well suited to applications that need repeatable acceleration, controlled deceleration, and steady low-speed behavior during indexing or placement tasks.

The motor has a flange diameter of 104 mm, allowing direct mounting to compact gearboxes or machine frames. Power and encoder leads exit through a rotatable angular connector, or through a terminal box, so cable orientation can be set after installation and adapted to limited cabinet space or moving machine sections. Rotor position is monitored with a two-pole resolver, which provides analog sine-cosine signals for coarse yet temperature-tolerant feedback across the speed range. An electromagnetic assembly engages at 24 VDC, and the integrated 24 V holding brake locks the shaft when the drive is de-energized to help prevent unwanted axis movement on vertical or loaded axes.

The output side uses a smooth shaft, simplifying coupling to backlash-free clamps or direct-drive pulleys without keyways. Within overall length code 2, the motor provides a holding torque range of 9 Nm to 20 Nm, which supports axes that must remain stable during brief stops or controlled positioning. The M winding identifies the standard electrical winding for this motor size and supports fast torque response while helping limit copper losses during cyclic operation. This winding arrangement also gives the paired servo drive a consistent electrical basis for current control, thermal behavior, and stable speed regulation during repeated start-stop movement.