Product Description:

The AM3052-0H00-0000 is a synchronous servo motor manufactured by Beckhoff and assigned to the AM Synchronous Servo Motors series. It functions as an electromechanical actuator that converts commanded current from a servo drive into tightly regulated rotational motion. The motor is intended for closed-loop motion systems in which the drive continuously adjusts torque and speed to match changing load conditions. This supports accurate positioning and speed control on automated packaging stations, pick-and-place axes, and other industrial machinery. Its feedback-based operation also supports repeatable indexing and synchronized axis movement in general automation equipment.

The motor interfaces mechanically through a 104 mm square flange that aligns with common machine mounting patterns and keeps shaft concentricity precise. Power and feedback lines can be routed through a rotatable angular connector or terminal box, so cable exit can be oriented to suit the control cabinet layout. A two-pole resolver sensor inside the stator supplies rotor position feedback to the drive controller for sinusoidal commutation. Drive torque is transmitted by a smooth shaft, a design intended for clamp or friction couplings where keyed engagement is unnecessary. Because the unit is delivered without a holding brake, static holding must be supplied by external devices or maintained drive torque.

It belongs to the Standard family, indicating baseline mechanical clearances and insulation systems used on this motor type. An overall housing length coded as 2 balances magnetic stack depth against installation space, while winding designation H aligns the electrical characteristics with compatible drive settings. Within the Synchronous Servomotors product line, the motor follows the same general connector and sealing approach used across related models. No special coatings, extended temperature options, or integrated brake are included, so the configuration remains focused on standard machine installations.