AM3052-0G01-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
The Beckhoff AM3052-0G01-0000 is a standard synchronous servo motor from the AM Synchronous Servo Motors series with a flange size of 104 mm and a smooth shaft design. It features a rated output of 1.85 kW at 400 Vac, a rated speed of 2500 rpm, and a holding brake voltage of 24 VDC. The motor offers peak torque of 29.7 Nm and a resolver feedback type.
Internal Product Review
The AM3052-0G01-0000 from Beckhoff's AM Synchronous Servo Motors series is a standard servo motor featuring a rated output of 1.85 kW and a rated speed of 2500 rpm. This unit offers a holding brake at 24 VDC and delivers a peak torque of 29.7 Nm for demanding automation tasks. The smooth shaft design and resolver feedback contribute to precise motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AM3052-0G01-0000 is a synchronous servo motor produced by Beckhoff for the AM Synchronous Servo Motors series. As a compact rotary actuator, it couples directly to machine shafts to execute position, speed, or torque commands issued by Beckhoff drive controllers in automated packaging, material-handling, and gantry systems. Its electromechanical design targets applications that require repeatable motion with low cogging and tightly integrated feedback.
To match common industrial control voltages, the holding brake coil accepts 24 VDC. Installation is simplified by a rotatable angular connector or an optional terminal box, while the resolver provides two-pole feedback for closed-loop commutation. The motor mounts to gearboxes or frames with a square flange measuring 104 mm. When rapid acceleration is required, the windings can draw a peak phase current of 23.6 A to produce high torque for short operating intervals. With a 400 VAC supply, the motor outputs 1.85 kW of mechanical power at a rated speed of 2500 rpm. Additional parameters include a standstill current of 4.72 A, a smooth shaft, winding code G, and an overall length code of 2 for this standard motor version.
During standstill, the windings develop 8.43 Nm of continuous torque, and the integrated brake secures loads with 9 Nm to 20 Nm, depending on the selected motor length. Short-burst operation can reach a peak shaft torque of 29.7 Nm, supported by a torque constant of 1.79 Nm/A. At its nominal operating point, the shaft delivers a steady 7.06 Nm, balancing thermal rise against magnetic saturation. The resolver feedback works with a winding resistance of 3.70 Ω, allowing the drive to calculate precise current vectors and use the appropriate tuning tables within the Beckhoff platform. This arrangement supports accurate commutation by providing the controller with continuous rotor-position information throughout the motor’s operating range.
