Product Description:

The AM3044-1E41-0000 is a synchronous servo motor produced by Beckhoff and assigned to the AM Synchronous Servo Motors series. Designed for closed-loop axis control in packaging lines, pick-and-place modules, and gantry systems, the motor converts electrical power from a matched drive into regulated rotary motion. Its integrated brake and multi-turn feedback allow the axis to start, stop, or hold position under deterministic command sequences within an industrial controller architecture. This arrangement supports high positional accuracy and repeatable cycle times. It is intended for machines that require accurate speed control together with precise stopping behavior at commanded positions.

The holding brake is energized by 24 VDC, which is a common control voltage in industrial cabinets. Motor cabling exits through a rotatable angular connector or terminal box, so the connection point can be positioned to suit the available cable path without stressing the leads. Position feedback is delivered through a Hiperface multi-turn 128 SinCos encoder from the F6 family, allowing the controller to read an absolute rotor angle over 4096 revolutions without a homing move. An 87 mm square mounting flange matches standard IEC dimensions and centers the shaft precisely on machine plates. Under brake engagement, the rotor can resist up to 9 Nm of torque, which helps keep vertical loads or index tables stationary when power is removed.

The shaft complies with DIN 6885 and is machined as a shaft with groove and feather key, so coupling hubs can be mounted without rotational slip during rapid load reversals. Internally, winding code E corresponds to the conductor arrangement used with overall length code 4. The selected winding and housing length support the thermal range used by this motor size. The keyed shaft format supports couplings that require positive torque transfer instead of friction-only clamping.