Product Description:

The AM3043-0E30-0000 is a synchronous servo motor manufactured by Beckhoff as part of the AM Synchronous Servo Motors series. It delivers controlled torque and speed for positioning, contouring, and feeder tasks found on packaging lines, metal-cutting centers, and automated assembly cells. Integrated with Beckhoff drive electronics, this motor forms the electromechanical element that translates commanded phase current into repeatable rotary motion while staying phase-locked with other machine axes.

Power and feedback connections enter the motor through a rotatable angular connector or terminal box, allowing cable routing to align with cabinet layouts or drag-chain paths. Rotor angle is measured by a Hiperface single-turn 128 SinCos encoder that provides 128 interpolation counts per revolution, enabling fine velocity control and low-ripple torque. The mechanical interface uses an 87 mm flange, matching common planetary gearheads and IEC adapters in this frame class. Motion is delivered through a smooth shaft, which works with collet, clamp, or shrink-fit couplings where backlash must be minimized. Electrical behavior follows the parameters in winding code E, linking the motor to a specific voltage, current, and inductance set in the Beckhoff drive range.

The unit is supplied without a holding brake, so vertical or high-inertia axes must employ an external brake or rely on drive torque to maintain position during power loss. Its enclosure corresponds to overall length code 3, a mid-length stack that saves axial space yet allows moderate continuous torque density. Beckhoff lists the motor as a standard motor series type, indicating the absence of special coatings, reinforced bearings, or food-grade seals. It also carries a standard version designation, meaning the housing, insulation system, and vibration limits follow the base design without additional variants.