Product Description:

The AM3041-1E40-0000 is a synchronous servo motor produced by Beckhoff within the AM Synchronous Servo Motors series. It is intended for closed-loop motion tasks in industrial automation where precise position and velocity control are necessary for packaging lines, handling modules, and assembly stations. The motor combines compact geometry with electronic feedback so that the connected drive controller can adjust torque quickly during rapid cycle changes.

This model attaches to machine frames through a 87 mm flange size, which provides a standardized bolt pattern for gearboxes or direct shaft couplings. Power and signal wiring enter through a rotatable angular connector or terminal box, and the swivel option eases cable routing in confined cabinets. Rotor position and absolute revolution count are returned by a Hiperface multi-turn 128 SinCos encoder from F6, allowing the drive to recover the exact shaft angle after power loss. Output torque is transferred by a shaft with a groove and feather key, a positive-fit interface that resists slip under reversing loads. The keyway geometry follows DIN 6885, which supports interchangeability with standardized couplings and pulleys used across plant installations.

The unit is supplied without a holding brake, so vertical axes must rely on external clamping or motor torque during power-off states. Electrical characteristics are identified by winding code E, which pairs the stator coils with drives that match this impedance and back-EMF profile. Mechanical stack depth is referenced through overall length code 1, indicating the shortest build in the AM3041 subgroup and aiding envelope calculations inside machinery. The motor carries the standard series type designation, confirming that no special coatings or high-dynamic options are included.