AM3041-0H41-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff AM3041-0H41-0000 is part of the AM Synchronous Servo Motors series and features a smooth shaft and a flange size of 87 mm. The motor comes equipped with a 24 VDC holding brake that provides a holding torque of 9 Nm, and offers Hiperface multi-turn 128 SinCos feedback from F6. It can be connected using either a rotatable angular connector or a terminal box.
Internal Product Review
The AM3041-0H41-0000 is a Beckhoff synchronous servomotor featuring Hiperface multi-turn 128 SinCos feedback and a smooth shaft. A 24 V holding brake and 9 Nm holding torque make the unit a strong choice for precise axis control and secure stopping.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AM3041-0H41-0000 is a synchronous servo motor manufactured by Beckhoff and assigned to the AM Synchronous Servo Motors series. The device supplies continuous, precisely regulated rotary motion for automated machinery, accepting drive commands from Beckhoff motion controllers and returning high-resolution position data for tight feedback loops. By integrating into standard IEC mounting interfaces, it enables compact placement inside handling modules, feeders, or material-processing equipment where repeatable velocity and accurate stop points are required. Its form factor suits axes that must fit into limited machine space while still maintaining responsive motion control during frequent starts and stops.
A brake voltage of 24 VDC energizes the electromagnetic clamp, providing fail-safe shaft locking when power is removed. Field wiring enters through a rotatable angular connector or terminal box, letting the cable outlet be oriented in the most convenient direction for the machine layout. Rotor position is reported by a Hiperface multi-turn 128 SinCos encoder, so the drive receives absolute position information at startup and fine sinusoidal signals during motion. The mounting interface follows an 87 mm square flange that mates with common planetary gearboxes. Under stall conditions, the motor can hold up to 9 Nm of static torque, supporting medium-load axes without an external brake. A smooth shaft transmits torque through friction-fit couplings or through hubs selected by the machine builder. This combination supports controlled motion on axes that need steady positioning, reliable restart behavior, and flexible cable routing.
The integrated 24 V holding brake shares the same supply used by many machine control circuits and helps prevent load drift on vertical axes. With Overall Length Code 1, the motor body stays short, which helps when nearby guards, slides, or transfer components leave little axial clearance. Both the motor series type and the mechanical version are classified as Standard, indicating that no optional sealing rings or stainless components are fitted. Coil properties are identified by winding code H, which matches the rated current and voltage range expected from Beckhoff drive amplifiers. The overall configuration is suited to general automation duties that need accurate feedback, compact installation, and straightforward integration with compatible servo hardware.
