Product Description:

The AM3041-0E41-0000 is a synchronous servo motor produced by Beckhoff and assigned to the AM Synchronous Servo Motors series. It acts as a compact rotary actuator for industrial automation, translating drive commands into controlled torque and speed on packaging lines, material-handling axes, and positioning gantries. The motor is suited for applications that need accurate motion during repeated starts, stops, and speed changes. In normal operation, the connected servo drive uses motor feedback to keep the shaft aligned with commanded position and velocity values. This makes it suitable for compact machine sections where consistent response is needed without using a large motor frame.

Its mechanical interface begins with a 87 mm square flange that bolts directly to gearheads or machine frames. Power and signal conductors exit through a rotatable angular connector or terminal box, so cable routing can be adjusted for side, rear, or top entry without changing the motor body. This arrangement also helps when the motor is mounted close to guards, panels, or adjacent axes. The rotor uses a smooth shaft, which supports clamp-style couplings instead of keyed connections. Closed-loop regulation relies on Hiperface multi-turn 128 SinCos from F6 feedback, providing absolute position data over multiple revolutions and fine signal interpolation for stable speed control.

The brake circuit operates on 24 VDC, and the motor includes a 24 V holding brake to secure the shaft when supply power is removed. That brake can withstand up to 9 Nm of static load torque, which is useful on vertical or suspended axes where the load must remain in place at standstill. The motor uses winding code E, and the housing has length code 1 to keep installation depth compact. Compact length is useful where adjacent components leave little clearance behind the motor.