Product Description:

The AM3033-1E01-0000 is a synchronous servo motor manufactured by Beckhoff and grouped within the AM Synchronous Servo Motors series. As a drive element, it supplies controlled torque and speed for automated axes, allowing precise positioning or continuous rotation in packaging machines, handling systems, and general motion-control assemblies. The unit is supplied in the standard version, which places it within the regular product family rather than a special build. It is intended for compact installations that use conventional brake power and resolver-based feedback. This arrangement supports repeatable motion where stable speed control and accurate stopping are required.

The holding brake coil is energized at 24 VDC, so the associated control cabinet must provide a matching low-voltage source. Position monitoring relies on a two-pole resolver that outputs sine-cosine signals for fine rotor angle detection during closed-loop operation. A flange diameter of 72 mm sets the mounting interface for gearboxes or machine plates and helps keep the stator centered during installation. When power is removed, the brake can hold the shaft with 2 Nm to 3.5 Nm of torque, which is suitable for moderate vertical loads or indexing tables. These values provide the main electrical and mounting data needed to match the motor with the surrounding drive hardware.

Power and feedback leads exit through a rotatable angular connector or terminal box, allowing the cable outlet to be aimed for the available machine space. Output torque is transmitted through a shaft with a groove and feather key, and the key geometry follows DIN 6885 so compatible hubs can be fitted without modification. Internally, winding code E is the electrical winding arrangement used in this frame. The overall length code 3 indicates the active stack depth used in this housing. These features describe the cable routing, shaft form, and internal winding selection used on this motor version.