AM3032-1D01-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff AM3032-1D01-0000 is a synchronous servo motor from the AM Synchronous Servo Motors series. It features a 72 mm flange size, a shaft with groove and feather key to DIN 6885 standards, and provides a holding torque between 2 Nm and 3.5 Nm depending on length. The motor is equipped with a 24 VDC holding brake and resolver feedback, and offers connection via a rotatable angular connector or terminal box.
Internal Product Review
The AM3032-1D01-0000 is a Beckhoff synchronous servomotor built in a standard version for reliable servo duty. A two-pole resolver supports stable feedback, and the shaft with groove and feather key simplifies secure mechanical coupling. The 24 V holding brake with up to 3.5 Nm holding torque makes the unit a strong choice for controlled positioning.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AM3032-1D01-0000 is a synchronous servo motor produced by Beckhoff within the AM Synchronous Servo Motors series. Designed for closed-loop position and velocity control, it converts drive output into accurate shaft rotation for tasks such as pick-and-place heads, feeder modules, and small conveyor zones in industrial automation. Its compact format suits machine sections that require repeatable starts, stops, and speed changes while maintaining precise motion control.
If a holding brake is fitted, it is energized with 24 VDC, allowing the motor to keep the load stationary whenever power is removed. Feedback is supplied by a two-pole resolver, giving analog sine-cosine signals that the controller converts into rotor angle information over the full mechanical revolution. A square 72 mm flange sets the mounting pattern, so the frame can be fastened directly to gearboxes or machine plates without adapters. Power and sensor wiring can be routed through a rotatable angular connector or terminal box, letting the cable exit direction be adjusted for tighter cabinet layouts. For static load locking, the brake applies between 2 Nm to 3.5 Nm of torque, depending on the motor length, to help prevent unwanted drift on vertical axes.
Mechanical transmission is handled by a shaft with groove and feather key, providing positive torque engagement with pulleys or rigid couplings. The groove dimensions comply with DIN 6885, which supports compatibility with standardized key stock used across machine-building applications. The overall length code 2 indicates a mid-length rotor that balances inertia and continuous torque, while the winding code D identifies the stator copper layout used for nominal voltage and current pairing with Beckhoff AX drive amplifiers.
