Product Description:

The AM3032-0C31-000A0 is a synchronous servo motor built by Beckhoff for the AM Synchronous Servo Motors series. As a compact rotary drive element, it converts drive amplifier current into precise torque and speed for positioning axes, pick-and-place gantries, and other coordinated motion tasks in industrial automation. Its synchronous design supports accurate motion control during repeated starts, stops, and direction changes. This makes the motor suitable for packaging equipment, assembly stations, and transfer systems that rely on repeatable rotary motion.

This model attaches to machinery through a 72 mm flange, giving a predictable mounting interface in the series. Rotor position is reported by a Hiperface single-turn 128 SinCos encoder, enabling high-resolution commutation and tight position loops. This feedback arrangement helps the connected drive maintain stable control at low speed and during rapid direction changes. Continuous static load retention is supported by a brake torque range of 2 Nm to 3.5 Nm. Brake power is supplied at 24 VDC, which matches common control voltage levels used in automation cabinets. The motor uses a smooth shaft, so torque is typically transferred through clamp-style couplings without a keyed connection.

The mechanical build uses overall length code 2, so the housing stays short where axis spacing is limited. Inside the stator, winding code C sets the voltage constant and current draw used with Beckhoff AX drive families. A spring-applied power-off brake secures vertical loads if supply power is removed. The motor series type is Standard, indicating the regular configuration used for this product line. That setup uses the usual bearing, insulation, and thermal monitoring arrangement for the motor family. The shorter body can help the motor fit compact machine sections where installation space is restricted.